Construction cleanup may be performed on new
construction sites, and it might be done in areas that are being remodeled.
When doing construction cleanup you have to make sure that you are not really
in the form of the craftsmen which is to be working in your neighborhood next,
and you must be sure you comply with all disposal laws.
Construction cleanup crews will usually rent a
dumpster from a company with the understanding that the debris which is to be
tossed into the dumpster will be construction related. About to catch allowed
to place construction debris into household dumpsters, or dumpsters which
aren't specifically set up for construction site usage.
Even if you have a dumpster designated for
construction cleanup use you may want to separate paint cans, chemical
containers, and aerosol containers from the scrap lumber, shingles, nails,
drywall, and other materials.
When cleaning up a house under construction you'll
want to do the cleaning in phases. After the carpenters frame the walls you'll
want to come in and pick up each of the lumber cut-offs, bent nails, and trash.
You ought to sweep the interior of the structure at this time.
An additional step of the construction will include
electricians coming in to pull wires through the walls so the carpenters can
come behind them and place wallboards, or sheetrock up. When the electricians
are finished there are not very much to clean up. You can clean again after
they complete their work or wait until the wall coverings have been hung.
You have got to clean the glass of newly installed
windows. There'll be dirt, dust, and stickers on them. You should utilize
fabric softener to make the stickers turn loose from the glass. Simply rub the
fabric softener over the paper backing of the sticker and let it sit there long
enough that it dissolves the glue holding the sticker in place. Maybe you have
to do it again several times just before each of the stickers removed. This
works on appliances, and delay that will help you remove old wallpaper borders
from walls.
New faucets, sinks, and tubs will all must be wiped
down to remove the dirt left behind during their installation. These items may
also have stickers on them that have to be removed. The fabric softener will
not harm the finish of the tub, sink, or shower.
You have got to vacuum new carpeting after it is
installed, and new tile floors should have a damp mop ran across them to remove
dirt and grime.
Comments
Post a Comment